Construction Progress
Compare each survey of a site with the one before, and see what was cut and what was filled, zone by zone, with the uncertainty on every figure.
On an earthworks or building site the ground changes every week. Someone has to say how much was dug out, how much was placed, and where. The usual answer is a table of volumes from the latest survey: it gives a total, but not the place, and seldom says how sure anyone can be of it.
Survey change monitoring is a Preview service: Twinise delivers it by arrangement and scopes it with you, and it is not a finished product you switch on.
The Problem On Site
Each new survey raises the same questions, and a spreadsheet answers few of them.
- Where did the ground move? A site total does not show which excavation went deeper or which stockpile grew.
- How sure is the figure? Every survey has its own error, and the difference between two surveys carries both. A volume quoted to the cubic metre hides that.
- Was the survey itself right? If a survey sits on the wrong datum, every figure taken from it is wrong. If someone adjusts it to fit, the error disappears from view.
- What happened over the months? Volumes sit in separate files and emails, one per survey, and the history of the site is hard to read back.
What The Service Is
Survey change monitoring compares each survey of your site with the one before and shows what changed: what was cut and what was filled, zone by zone, with the uncertainty on every figure.
It is an arranged service, not a self-serve feature. The surveys come from the surveyor we work with, Twinise runs the comparison, and you receive the result. There is no screen where you upload a survey and press a button.
How It Works
A baseline survey
The service starts from a baseline survey of the site. It is the surface the next survey is measured against.
Each new survey against the previous one
Each new survey is compared with the previous one. Surveys are brought into Twinise by arrangement with the surveyor; there is no automatic hand-over today.
Zones
The site is divided into zones, such as an excavation or a stockpile area, so that every figure belongs to a place. Which zones matter on your site is agreed when the service is scoped.
Cut and fill volumes
For each zone, the change between the two surveys is given as cut (ground lowered) and fill (ground raised). On the 3D model of the site, cut is drawn in amber and fill in teal, where the ground moved.
Uncertainty and level of detection
Every volume carries its uncertainty and its level of detection. The uncertainty is the range the figure could reasonably sit within. The level of detection is the smallest change in height that can be told apart from the noise in the two surveys. Together they say how far a figure can be relied on.
A check on stable ground
Ground that should not have moved between the two surveys is compared as well. If that stable ground disagrees with the previous survey, for example because of a datum error, the new survey is refused against the previous survey and the reason is stated. It is not quietly corrected to fit.
A one-page field report
A field report can be made for one surveyed field, on a single page.
Review on the 3D site model
The result is drawn on a 3D model of the site in Unreal Engine 5.8, through the Twinise Unreal plugin. A time scrubber steps through the surveys, so you can follow the site from one survey to the next and stop on any of them. How you and your team see the result is agreed with you.
What It Gives You
Site managers: where, not just how much
The change is drawn on the model zone by zone, so which areas were worked since the last survey is something you can point at, not a total to interpret.
Quantity surveyors: a figure you can explain
Each volume comes with its uncertainty and level of detection. You can say how sure a figure is, not just what it is, before you use it.
Project owners: one place to read change over time
The surveys sit in order on one model of the site, not in a folder of spreadsheets, and stepping through them shows how the site has changed since the baseline.
Everyone: a bad survey is stopped
When the stable ground disagrees, the survey is refused and you are told why, instead of it being adjusted until it looks right.
Features
- Each survey compared with the previous one
- Cut (amber) and fill (teal) volumes, per zone
- Uncertainty and level of detection on every volume
- Refusal of a survey whose stable ground disagrees with the previous survey, with the reason
- A time scrubber to step through the surveys
- A one-page field report for one surveyed field
- Review on the 3D site model in Unreal Engine 5.8
What You Provide And What We Provide
You provide
- The site: where the works are, which areas matter to you and how often it is surveyed.
- The questions you need answered, and who in your team needs the result.
- The surveys, through the surveyor we work with. Whether surveys from your own surveyor can be used is something we check when scoping.
We provide
- The comparison, the volumes with their uncertainty and level of detection, the stable-ground check and the field report, all run by Twinise.
- Reviews of the result on the 3D site model.
What Is Manual Today
- Bringing surveys in. Surveys reach Twinise by arrangement with the surveyor. There is no automatic weekly hand-over.
- Running the comparison. Twinise runs it for you.
- Reporting. The tool makes one page for one surveyed field. A multi-page report for a period, with a trend, a zone table and data-quality notes, is not a tool output.
Who It Suits
- Earthworks and building sites surveyed at regular intervals, where the main question is how the ground has changed.
- Teams who would rather have a volume with its uncertainty than a single unqualified number.
- Teams willing to scope a Preview service with us and say what they need from it.
It does not suit you today if you need percentage complete, progress against a programme, or a comparison of the site with its design or BIM model.
Status
Survey change monitoring is Preview. It is built and has been shown, but it is not a released product and has not been proven end to end. The comparison runs in the Twinise Unreal plugin (Unreal Engine 5.8) and in survey analysis software run by Twinise.
| Part | Where it stands |
|---|---|
| Comparison, cut and fill, uncertainty, refusal of a survey | Preview |
| One-page field report for one surveyed field | Preview |
| Hand-over of surveys into Twinise | By arrangement, not automatic |
| Multi-page report as shown in the film | A layout designed for the film, not a tool output |
| Comparison with a design or BIM model | Not part of the service |
| Site sensors alongside the surveys | To be scoped, not included |
The film above uses a real survey for the baseline and synthetic data after it, so the figures it shows are illustrative, not survey results.
When a building rises on the site, the volume shown for it is that of its envelope as a survey from above sees it, not of material.
The service is being developed further, and details on this page will change. Talk to us before planning a project around it.
Questions
Can I buy this and run it myself?
No. It is a Preview service, delivered by arrangement and scoped with you. The comparison is run by Twinise, and the Unreal plugin is not something you install yourself today.
How accurate are the volumes?
We do not quote a general accuracy figure. Each volume is reported with its own uncertainty and level of detection, and those are the figures to read.
What happens when a survey is refused?
It is refused against the previous survey, with the reason stated, for example that ground which should not have moved sits at a different height. It is not adjusted to fit. A refusal is a prompt to check the survey before any figure from it is relied on.
Does it compare the site with our design or BIM model?
Not today. The service compares each survey with the previous one, not with a design.
Can site sensors be added?
Twinise devices already report readings to dashboards in the portal. Running site sensors alongside the surveys is something to scope with us; it is not included in this service.
Where To Start
Tell us about the site, the stage the works are at and how often it is surveyed. We will scope what the service would cover, how the surveys would reach us, and what would still be manual.
Want to try this on your own site?
Hardware is supplied as a pilot, by arrangement. Tell us about your site and we will scope construction progress with you.
Request a pilot